EMUC-B202
USB to dual isolated CANbus 2.0B/ J1939/ CAN
CANbus 2.0B backward compatible with 2.0
Support baud rate 100/125/250/500(default)/800/1000K
Support CAN message acceptance filter
Keep configuration after hardware reboot
Up to 6000 CAN messages per second (receive data)
Additional driver to support Linux SocketCAN
Termination resistor enabled/disabled by jumper
Complies with EN61000-4-5 2.5kV Surge protection
Support Listen-only mode
Support SAE J1939/CANopen high layer protocol (Optional)
Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV
HiPOT protection
Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
Supports 3rd mounting hole and USB Pin header for out-ofminicard installation
30μ" golden finger, 3-year warranty
Supports -40 to +85 degrees
System
| Form-Factor |
mPCIe |
|---|---|
| Input I/F |
USB 2.0 |
| Output I/F |
CANbus 2.0B |
| Output Connector |
2 x DB-9 |
| Power Consumption |
1.62W (3.3V, 490mA) |
| Dimension |
30(W) x 50.9(L) x 8.35(H) mm |
| Temperature |
Operation: W/T: -40°C ~ +85°C |
| Environment |
Vibration: 5G @7~2000Hz, Shock: 50G @ 0.5ms |
| Notes |
Download driver and API from MyInnodisk website. |
Ordering Information
| EMUC-B202-W1 (CAN2.0B, Wide Temp.) |
USB to dual isolated CANbus 2.0B Module |
|---|---|
| EMUC-B202-W2 (J1939, Wide Temp.) |
USB to dual isolated CANbus J1939 Module |
| EMUC-B202-W3 (CANopen, Wide Temp.) |
USB to dual isolated CANbus CANopen Module |
